be made by turning the elevation and
azimuth adjusters in the required
direction at a rate of two clicks for
each square on the target.
Repeat the firing-in procedure until
the center of your shot group and the
"designated strike point" can be
covered by the lens end of a standard
flashlight at the same time.
Your aiming light is now zeroed with
your M60 Machine Gun and is effective
for targets out to 100 meters.
Procedures for Zeroing M67 Recoil less
Rifle with Aiming Light
NOTE
procedure
The following
must be performed at night
on an M67 range at a maximum
distance of 100 meters.
On a standard 25 meter target mark a
large cross and a circle at the loca-
tions shown in this picture.
58
