TM 11-5855-217-12
the receptacle on the searchlight. Be sure to plug
(1) Disconnect the remote control box inter-
the cable firmly into the receptacle before tighten-
connecting cable (not shown) from receptacle
ing the cable retainer.
3J1 on the remote control box.
(2) Remove the four mounting screws (7)
d. Attach the other end of the replacement
power cable to the vehicle receptacle.
control box mounting plate to the vehicle.
(3) Remove the remote control box from the
5-17. Replacement of
Remote Control Box
vehicle.
b. Replace remote control box in vehicle as
a. Remove remote control box from vehicle as
follows:
follows:
(1) Position the remote control box so that
WARNING
the four mounting holes in the mounting plate are
To prevent injury to personnel, turn off
aligned with the four mounting holes in the
the searchlight and vehicle power source.
vehicle.