TM 9-5855-253-10
2-13.
SETTING UP AN/GVS-5 TO NIGHT SIGHT
A . Remove AN/GVS-5 (1) from its case (2).
Do not touch FIRE button (3) on the AN/GVS-5 (1)
until ready to range a target.Do not leave
AN/GVS-5 (1) installed on APC mount assembly
while vehicle is moving. Damage to the AN/GVS-5 (1)
will result.
B.
Aline mounting plate on bottom of AN/GVS-5 (1) with the
traverse head assembly V-way (4).
C.
Aline captive screw (5) in V-way (4) with threaded
hole on bottom of AN/GVS-5 (1).
Insure captive screw (5) in V-way (4) is not
crossthreaded into AN/GVS-5 (1).
D.
Engage and tighten the captive screw (5) to secure AN/GVS-5 (1) to
traverse head assembly V-way (4).
END OF TASK
2-30
