TM 9-5855-253-10
2-12.
SETTING UP NIGHT SIGHT ON TRAVERSE HEAD
(Sheet 1 of 2)
A.
Remove Night Sight (1) from field handling case (2) and check for
Verify that battery (3) and coolant cartridge (4) are in place.
B.
C . Place positioning handle (5) in position No. 1 (forward position).
Night Sight should have coolant cartridge
installed at all times other than when
exchanging cartridges.
D.
Be sure that Night Sight actuator (6) is set to OFF/LOCK position.
GO TO NEXT PAGE
2-28
