Using a cartridge rim or coin, adjust
the azimuth adjuster of your aiming
light 4 clicks right and adjust the
elevation adjuster 6 clicks down.
This final adjustment is to correct
for the "designated strike point" on
the zero target.
You are now ready to "fine tune" your
aiming light by firing-in.
CAUTION
Be sure you have removed the
boresight from your weapon
before proceeding.
From a foxhole supported or prone
supported firing position, turn on
your aiming light and center the spot
on the center of the black rectangle
This is called the
on the target.
"aiming point."
When instructed to "fire," carefully
fire three single rounds at the "aim-
ing point" on the zero target.
When instructed to "check your tar-
inspect the shot group and
get,"
47
