Procedure for Attaching the Mounting
Bracket and Aiming Light to the M67
Recoil less Rifle
Remove the daylight scope, if in-
stalled, by turning it clockwise until
it stops rotating. Withdraw daylight
scope, allowing it to rotate slowly
counterclockwise.
Position the M67 mounting bracket so
that the index line on the bracket is
aligned with the index line on the
Press the
daylight scope mount.
bracket assembly into the mount while
turning clockwise until the threads
disengage and
the bracket seats
Then rotate the
against the mount.
bracket slowly counterclockwise until
secure.
Place aiming light in groove on the
bracket so that the threaded screw
hole in foot of the aiming light is
aligned with the lever screw assembly
and tighten the lever screw assembly
firmly to secure the light to the
bracket.
35
