MWO 9-2350-314-20-1
10.
MODIFICATION PROCEDURES -CONTINUED
d. Periscope/NVD Support Locks:
(1) Removal:
(a) Remove two screws (1), two flat washers (2), and sleeve (3). Set aside screws, fiat washers, and
(b) Remove rod (4) from hull.
NOTE
Steps c, d, and e are for the center periscope position only.
(c) Remove spring (5) and flat washer (6) from rod (4).
(d) Remove bracket, solenoid (7) from rod (4).
(e) Remove spacer (8). Set aside spacer for disposition per para 8f.
(f) Remove cam control (9). Set aside cam control for disposition per para 8f.
Legend:
1.
Screw MS90728-59
2.
Washer, Flat 10910174-3
3.
Sleeve 10903581
4.
Rod 10888686
5.
Spring 12352838
6.
Washer, Flat MS27183-14
7.
Bracket, Solenoid, 12352822-1, 12362822-2
8.
Spacer 12352825
9.
Cam Control 10903639
*Parts removed and reused.
10