located on the top of the aiming
light, turn the coin plate one
full turn clockwise.
The adjusters are now in a neutral
Light up the target by placing a
flashlight down range in front of it
or by using vehicle headlights.
From a supported position, carefully
aim through the daysight at the center
of mass of the target.
otherwise brace your weapon to hold it
steady on the target.
Turn off the flashlight or headlights
you used to light up the target.
Put on Night Vision Goggles, AN/PVS-5
or -5A, in accordance with TM 11-5855-
238-10 and turn them on.
Put the aiming light switch in the