Section I. SERVICE UPON RECEIPT OF
box. The smaller components are packed in a carton
which is placed within the shipping box.
b. Dimensions, weight, and contents of the ship-
a. When packed for shipment, the components of
ping box and carton are listed below.
the searchlight set are packed in a wooden shipping
has been damaged, report the damage on DD Form 6
b. See that the equipment is complete as listed on
Perform all the procedures listed below, in
the packing slip. If a packing slip is not available,
the order given, when unpacking equip-
check the equipment against the basic issue items
ment from shipping box.
a. Pry open and remove the lid of the shipping box
ties in accordance with TM 38-750. Shortage of a
minor assembly or part that does not affect proper
b. Remove the carton from the shipping box.
functioning of equipment will not prevent use of the
c. If equipment has been used or reconditioned, see
Removing the searchlight from the ship-
whether it has been changed by a modification work
ping box requires two men.
order (MWO). If equipment has been modified, the
MWO number will appear on front panel near
c. Carefully remove the searchlight from the
nomenclature plate. Check to see whether the MWO
number, if any, and appropriate notations concern-
d. Remove the wrapping material from each
ing modification have been entered in equipment
2-3. Checking Unpacked Equipment
Current MWO'S applicable to the equip-
a. Inspect the equipment for any damage that may
ment are listed in DA Pam 310-7.
have occurred during shipment. If the equipment